RKS CARBON S

The up to 60 mm high Carbon S squeegee blades are mainly intended for mounting into a conventional squeegee holder with an aluminium shim.

The 95, 105 and 115 millimetres high squeegee blades arefixed directly into the RKS squeegee holder. Also by using the adaptor bar they can be used in a standard squeegee holder.

Non-standard blade height

Non-standard blade heights can be made on request.

For such heights the price of the next higher standard blade height will be calculated.

(e. g. a profile height 70 mm = a price for the height of 95mm)

Blade Design

The Carbon S is only available in the type 00, this means the CRP backing has an equal thickness through its height.

The squeegee is available in three different variations:

1. wall thickness of approx. 1.2 mm

2. wall thickness of approx. 1.7 mm

3. wall thickness of approx. 2.5 mm

Rubber Thickness and Shore hardness

6 mm rubber thickness: 65 and 75 Shore

8mm rubber thickness: 55, 65 and 75 Shore

Profile Length

The maximum length of blade that we can offer at the moment is 2800 mm.

The maximum length of Carbon S HQ that we can offer at the moment is 2600 mm.

Pre-cut lengths are available on request.